|
Logo 3000 Process Colours
High concentration Machine stability |
Characteristics
Semi-overnight process colours with high pigment concentration.
> Very large reduction of ink consumption.
> Very good setting.
> High Gloss.
> Excellent rub resistance
| Ink Profile | + | + + | + + + |
| Duct freshness | |||
| Setting | |||
| Colour strength | |||
| Dot Sharpness | |||
| Gloss | |||
| Rub resistance | |||
| Hard drying | |||
| Substrates | Recommendation |
| Non coated | * |
| Matt coated | ** |
| Gloss coated | *** |
| Cardboard | *** |
| Synthetics and non absorbent substrates |
|
|
*** Recommended ** Authorised use * Use with precaution
Prohibed;
|
|
Use
> Prints can be wet-on-wet or wet-on-dry varnished with conventional offset or acrylic varnishes.
> Prints may be laminated or UV and nitrocellulose varnished after drying.
> Compatible with infra red (I.R.) drying.
> Varnishing recommended on cardboard.
Precautions
> Recommended drying time before laminating or UV varnishing : between 24 and 48 hours...
| > I.R. drying : |
Not recommended in the case of UV varnishing. Maximum stack temperature : 35 °C on top and 30 °C on reverse side. |
| Logo 3000 Process Colours | Light |
Resistance Alcohol |
Alkali |
| Logo 3000 Process Yellow | 5 | + | + |
| Logo 3000 Process Magenta | 5 | + | - |
| Logo 3000 Process Cyan | 8 | + | + |
| Logo 3000 Process Black | 8 | - | + |
| > 1kg Tins. | > 2kg Cartridges. | ||
| > 2,5kg Tins. | > 200kg Drums. | ||